Aerial Boom Lift Training Port Coquitlam

Aerial Boom Lift Training Port Coquitlam - Aerial Boom Lift Training is necessary for any individual who supervises, operates or works near boom lifts. This particular type of aerial lift or aerial work platform is utilized for lifting individuals, tools and materials in projects requiring a long reach. They are generally utilized to access utility lines and other above ground job-sites. There are different types of aerial booms lifts, such as extension boom lifts, cherry pickers and articulating boom lifts. There are two categories of boom lift: "telescopic" and "knuckle".

Boom lift training is essential and usually involves the fundamental operations, equipment and safety concerns. Workers are required when working with mobile machines to understand the safe work practices, rules and dangers. Training program materials provide an introduction to the terminology, applications, skills and concepts needed for employees to acquire competence in operating boom lifts. The material is aimed at workers, machine operators and safety experts.

For your company requirements, this training is educational, adaptive and cost-effective and would help your workplace become more effective and safer, allowing for higher levels of production. Less workplace incidents take place in workplaces with strict safety policies. All equipment operators must be trained and evaluated. They require understanding of present safety measures. They should understand and adhere to guidelines set forth by the local governing authorities and their employer.

It is the employer's responsibility to make certain that workers who are required to utilize boom lifts are trained in their safe use. Every different kind of workplace equipment requires its own equipment operator certification. Certifications are available for articulating booms, aerial work platforms, industrial forklift trucks, scissor lifts, and so forth. Employees who are fully trained work more effectively and efficiently than untrained workers, who require more supervision. Right instruction and training saves resources in the long run.

Training is the best prevention for the primary reasons for workplace deaths: electrocutions, falls and tip overs or collapses. Other than training, the best way to avoid workplace accidents is to maintain and operate aerial work platforms based on the instructions of the manufacturer. Allow for the combined weight of the materials, worker and tools when following load restrictions. Never override mechanical, electrical or hydraulic safety devices. Employees must be held securely in the basket utilizing a body harness or restraining belt with a lanyard attached. Do not move lift equipment while workers are on the elevated platform. Employees should be careful not to position themselves between the beams or joists and basket rails in order to avoid being crushed. Energized overhead power lines should be at least 10 feet away from the lift machinery. It is recommended that workers always assume power lines and wires might be energized, even if they are down or seem to be insulated. Set the brakes and use wheel chocks if working on an incline.

Click to Download the pdf