Forklift Training Course Port Coquitlam

Forklift Training Course Port Coquitlam - Industry and federal regulators have established the criteria for forklift safety training according to their current regulations and standards. People wanting to use a forklift must finish a forklift training program before utilizing one of these equipment. The accredited Forklift Operator Training Program is designed to offer trainees with the information and practical skills to become an operator of a forklift.

There are forklift operation safety regulations that should be followed pertaining to pre-shift inspections, and regulations for lifting and loading.

An inspection checklist must be completed and submitted to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the specific equipment must be stopped until the problem has been addressed. To be able to indicate the equipment is out of order, the keys have to be removed from the ignition and a warning tag placed in a location that is seen.

Safety rules for loading would consist of checking the load rating capacity on the forklift to determine how much the machine could handle. When starting the machine, the forks must be in the down position. Remember that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage which the load is carried.

Lifting must begin with the driver moving to a stopped position about three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Lift the forks to an inch underneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other staff. Never allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a hazard to other people or objects. Restraining loads is needed for materials that might shift during transport and destabilize the forklift.

In order to prevent the shifting of drums, drums can be strapped together to reduce movement. Operators of forklifts must drive slowly when transporting liquids, to decrease instability in the forklift.

Click to Download the pdf